TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 655 of 1178
TM 9-2320-366-34-3 16-71. M1089 FOLD CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Underlift assembly lowered to ground (TM 9-2320-366- 10-2). Engine shut down (TM 9-2320-366-10-1). Hydraulic reservoir supply and return valve closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Tools and Special Tools (Cont) Wrench Set, Crowfoot Ratcheting (TM 9-2320- 366-20) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Packing, Preformed (2) (Item 236, Appendix F) a. Removal. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (1) Disconnect hoses (1 and 2) from fold cylinder (3). 16-431