TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 649 of 1178
TM 9-2320-366-34-3 NOTE Replace any part that fails visual inspection or size measurement requirements. (2) Inspect retaining pin (1) for pitting, burrs, indications of binding or damaged threads. (3) Inspect retaining pin (1) for minimum outside diameter 2.49 in. (6.32 cm). (4) Inspect two bushings (2) for pits, corrosion or burrs. (5) Inspect spacer (3) for pits, corrosion, or burrs. (6) Inspect two pivot yoke bushings (4) for pits, corrosion or burrs. (7) Inspect pivot pin (5) for pitting, burrs, indications of binding or damaged threads. (8) Inspect thrust bearing (6) for cracks or excessive grooving. Minimum thickness 0.062 in. (0.16 cm). d. Assembly. (1) Install two pivot yoke bushings (1) in pivot yoke (2). (2) Position bushing (3) and pivot pin (4) in pivot yoke (2) with four screws (5). (3) Tighten four screws (5) to 30-33 lb-ft (41-45 N·m) 16-421