TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 647 of 1178
TM 9-2320-366-34-3 b. Disassembly. NOTE Left and right side of crossbar are disassembled the same way. Left side shown. (1) Remove three screws (1) and washers (2) from adjustment block (3). (2) Remove three screws (4) from adjustment block (3). (3) Remove two spring pins (5) and nuts (6) from adjusting screw (7). Discard spring pins. (4) Remove adjustment block (3) and shim pack (8) from crossbar (9). (5) Remove mounting block (10) and adjustment screw (7) from crossbar (9). (6) Remove adjustment screw (7) from mounting block (10). (7) Remove latch pin (11) and pin (12) from mounting block (10). (8) Remove pin (13) from crossbar (9). (9) Remove lockwire (14), three screws (15), washers (16), plate (17), shim pack (18), thrust washer (19), and pivot yoke (20) from crossbar (9). Discard shim pack and lockwire. 16-419