TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 645 of 1178
TM 9-2320-366-34-3 WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (28) Apply sealing compound to threads of two bolts (47). (29) Position pay-out hydraulic motor (48) on spooler weldment (17) with two washers (49) and bolts (47). (30) Tighten bolts (47) to 76-84 lb-ft (103-114 N·m). (31) Position two hoses (50) on pay-out hydraulic motor (48). (32) Tighten hoses (50) to 36-39 lb-ft (49-53 N·m). (33) Perform steps (28) through (32) on right spooler weldment. c. Follow-On Maintenance. (1) Install rear ladder (TM 9-2320-366-20-4). (2) Hydraulic reservoir supply and return valves in open position (TM 9-2320-366-10-2). (3) Install rear tool box (TM 9-2320-366-20-4). (4) Operate underlift and stiffleg assembly checking for proper operation and hydraulic leaks (TM 9-2320-366- 10-2). End of Task. 16-417