TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 643 of 1178
TM 9-2320-366-34-3 (13) Position two springs (23), washers (24), and bolt (25) in spooler weldment (17). (14) Position plate (26) on spooler weldment (17) with six bolts (27). (15) Tighten bolts (27) to 76-84 lb-ft (103-114 N·m). (16) Position two guide rollers (28), roller pins (29), retaining plates (30), lockwashers (31), and bolts (32) on spooler weldment (17). (17) Tighten bolts (32) to 76-84 lb-ft (103-114 N·m). (18) Tighten bolt (25) eight and one half turns. NOTE Left and right side gladhand brackets are installed the same way. Left side shown. (19) Position gladhand bracket (33) on spooler weldment (17) with four washers (34), bolts (35), and self-locking nuts (36). (20) Tighten self-locking nuts (36) to 33-37 lb-ft (45-50 N·m). (21) Perform steps (5) through (20) on right side of vehicle. 16-415