TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 642 of 1178
TM 9-2320-366-34-3 16-68. M1089 UNDERLIFT AND STIFFLEG ASSEMBLY REPLACEMENT (CONT) NOTE Left and right side tow chain anchors are installed the same way. Left side shown. (7) Position tow chain anchor (12) on fender (13) with four washers (14) and bolts (15). (8) Tighten bolts (15) to 152-168 lb-ft (206-228 N·m). NOTE Left and right side 30K winch cables are installed the same way. Left side shown. (9) Route 30K winch cable (16) through spooler weldment (17). (10) Install pin (18) in 30K winch cable (16) with cotter pin (19). (11) Position cable sheave (20) in spooler weldment (17). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (12) Install pin (21) in spooler weldment (17) with two retaining rings (22). 16-414