TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 620 of 1178
TM 9-2320-366-34-3 16-64. M1089 30K WINCH DRIVE MOTOR ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE Largest open pocket can be in any location on geroler. (15) Locate and mark position of largest open pocket in geroler (14). (16) Install valve drive (15) in geroler (14). (17) Install preformed packing (16) in valve plate (17). (18) Install valve plate (17) on geroler (14) with match marks aligned. (19) Align any open slot in valve plate (17) with largest open pocket in geroler (14). WARNING Use care when installing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (20) Install two check balls (18) and springs (19) in valve housing (20). (21) Install two preformed packings (21) on check ball plugs (22). (22) Install two check plugs (22) in valve housing (20). (23) Tighten two check ball plugs (22) to 40-60 lbs-in. (5-7 N·m). 16-384