TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 616 of 1178
TM 9-2320-366-34-3 16-64. M1089 30K WINCH DRIVE MOTOR ASSEMBLY REPLACEMENT/REPAIR (CONT) (16) Remove two check ball plugs (21) from valve housing (3). (17) Remove two preformed packings (22) from check ball plugs (21). Discard preformed packings. WARNING Use care when removing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (18) Remove two springs (23) and check balls (24) from valve housing (3). NOTE Match mark valve plate and geroler prior to disassembly. (19) Remove valve plate (4) from geroler (25). (20) Remove seal (26) from valve plate (4). Discard seal. (21) Remove valve drive (27) from geroler (25). NOTE Match mark geroler and wear plate prior to disassembly. (22) Remove geroler (25) from wear plate (28). (23) Remove preformed packing (29) from wear plate (28). Discard preformed packing. (24) Remove star (30) and seven rollers (31) from geroler (25). (25) Remove drive (32) from bearing housing (1). (26) Remove bearing housing (1) from vise. 16-380