TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 612 of 1178
TM 9-2320-366-34-3 16-64. M1089 30K WINCH DRIVE MOTOR ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Hydraulic supply and return valve closed (TM 9-2320-366-10-2). 30K winch counterbalance valve removed (para 16- 81). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Vise, Machinist (Item 82, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Adapter, Socket Wrench (Item 3, Appendix B) Socket Wrench Attachment, Screwdriver (Item 62, Appendix B) Pan, Drain (Item 43, Appendix B) Tools and Special Tools (Cont) Socket Wrench, Attachment (TM 9-2320-366-20) Hammer, Hand, Soft Head (Item 33, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Lockwasher (2) (Item 157, Appendix F) Cloth, Abrasive, Crocus (Item 21, Appendix C) Parts Kit, Seal Replacement (Item 316, Appendix F) Insulating Compound, Electrical (Item 41, Appendix C) Personnel Required (2) a. Removal. NOTE Left and right 30K winch drive motors are replaced/repaired the same. Left 30K winch drive motor assembly shown. (1) Place drain pan under 30K winch drive motor assembly (1). NOTE Step (2) requires the aid of an assistant. (2) Remove two screws (2), lockwashers (3), and 30K winch drive motor assembly (1) from 30K winch assembly (4). Discard lockwashers. 16-376