TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 608 of 1178
TM 9-2320-366-34-3 16-63. 30K WINCH ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE • Left and right side lamp brackets are installed the same way. Left side shown. • Refer to Table 16-2. Clearance Marker Light Connector for combinations of terminal lugs and connectors on each marker light. (19) Route harness (26) through 30K winch assembly (2). (20) Install lamp bracket (27) on 30K winch assembly (2) with three screws (28) and self-locking nuts (29). (21) Connect harness connector (30) to electrical connector 489 (31). (22) Install terminal lug (32) on marker light (33) with washer (34) and nut (35). (23) Perform steps (21) and (22) on right side lamp bracket. Table 16-2. Clearance Marker Light Connectors Marker Light Location Connector Terminal Lug Left Side P94 TL88 Right Side P95 TL89 (24) Position monoblock valve (36) on 30K winch assembly (2) with mounting plate (37), two screws (38), and self- locking nuts (39). (25) Position three screws (40) and self-locking nuts (41) in mounting plate (37). (26) Tighten three self-locking nuts (39 and 41) to 76-84 lb-ft (103-114 N·m). 16-372