TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 607 of 1178
TM 9-2320-366-34-3 (9) Position four screws (11), eight washers (12), and four nuts (13) on 30K winch assembly (2). (10) Tighten four nuts (13) to 76-84 lb-ft (103-114 N·m). (11) Position valve manifold assembly (14) on 30K winch assembly (2) with two washers (15), screws (16), and nuts (17). (12) Tighten two nuts (17) to 12-24 lb-in. (1-3 N·m). (13) Connect air hose (18) to valve manifold assembly (14). (14) Position terminal board (19) on 30K winch assembly (2) with two washers (20), screws (21), and nuts (22). (15) Tighten two nuts (22) to 12-24 lb-in. (1-3 N·m). NOTE Install plastic cable ties as required. (16) Route remote control harness (23) through 30K winch assembly (2). (17) Position cable harness (24) by terminal board (19). NOTE Terminal board uses friction type connections. Screws are not removed. (18) Install 10 wires (25) to top of terminal board (19). 16-371