Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 602 of 1178

TM 9-2320-366-34-3 16-63. 30K WINCH ASSEMBLY REPLACEMENT/REPAIR (CONT) (37) Install banding strap (38) on drum (1) and gear end support (5). (38) Position drum (1) with gear end cover (22) down. (39) Remove banding strap (38) from drum (1) and gear end support (5). (40) Install preformed packing (39) and spacer (40) on output shaft (3). (41) Install bearing (41) in motor end support (42). (42) Install thrust washer (43) in motor end support (42). (43) Install seal (44) in motor end support (42). (44) Position motor end support (42) on drum (1). (45) Install bearing (45) in motor end support (42). (46) Install 12 springs (46) in motor end support (42). (47) Install preformed packing (47) on plunger (48) (48) Install preformed packings (49 and 50) and back-up rings (51 and 52) on plunger (48). 16-366