TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 597 of 1178
TM 9-2320-366-34-3 (8) Inspect bearing (7) for free movement and pitting, or corrosion. (9) Measure 12 compression springs (8) for minimum length of 1.00 in. (2.5 cm). (10) Inspect two hoses (9) for cracks, breaks, or damaged threads. (11) Inspect two roller bearings (10) for free movement and pitting or corrosion. (12) Measure two thrust washers (11) for minimum thickness of 0.37 in. (0.95 cm) (13) Inspect ring gear (12) for pitted or broken gear teeth. (14) Inspect gear end support (13) seating surface for nicks or scratches. (15) Inspect output shaft (14) for pitted, or broken splines. (16) Measure two nylon thrust washers (15) for minimum thickness of 0.17 in. (0.4 cm). (17) Inspect primary carrier assembly (16) for free movement of gears, pitting, or broken teeth. (18) Inspect secondary carrier assembly (17) for free movement of gears, pitting, or broken teeth. (19) Inspect sun gear (18) for pitted or broken teeth. 16-361