TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 585 of 1178
TM 9-2320-366-34-3 (12) Remove three self-locking nuts (32) and screws (33) from mounting plate (34). Discard self-locking nuts. (13) Remove two self-locking nuts (35), screws (36), mounting plate (34), and monoblock valve (37) from 30K winch assembly (10). Discard self-locking nuts. NOTE • Left and right side maker lights are removed the same way. Left side shown. • Refer to Table 16-1. Clearance Marker Light Connectors for combinations of terminal lugs and connections on each marker light. (14) Remove nut (38), washer (39), and terminal lug (40) from marker light (41). (15) Disconnect electrical connector 489 (42) from harness connector (43). (16) Remove electrical harness (44) from 30K winch assembly (10). (17) Removed three self-locking nuts (45), screws (46), and lamp bracket (47) from 30K winch assembly (10). Discard self-locking nuts. (18) Perform steps (14) through (17) on right side marker light. Table 16-1. Clearance Marker Light Connectors Marker Light Location Connector Terminal Lug Left Side P94 TL88 Right Side P95 TL89 Change 1 16-349