TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 572 of 1178
TM 9-2320-366-34-3 16-60. M1089 TWO WAY SOLENOID VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Hydraulic reservoir supply valve and return valve closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Pan, Drain (Item 43, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Lockwasher (2) (Item 138, Appendix F) Packing, Preformed (2) (Item 231, Appendix F) Packing, Preformed (2) (Item 237, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Sealing Compound (Item 75, Appendix C) a. Removal. (1) Disconnect electrical connector (1) from two way solenoid valve (2). (2) Place drain pan under two way solenoid valve (2). CAUTION Cap or plug hydraulic connections and connection points to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic tubes and connection points prior to disconnecting. (3) Disconnect hydraulic tubes (3 and 4) from two way solenoid valve (2). 16-336