Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 570 of 1178

TM 9-2320-366-34-3 16-59. M1089 EIGHT-BANK VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) WARNING • Crane control panel weighs approximately 150 lbs (68 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. • Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (7) Apply sealing compound to threads of six bolts (11) NOTE Steps (8) and (9) require the aid of an assistant. (8) Position crane control panel (5) on vehicle with six washers (12), bolts (11), and self-locking nuts (13). (9) Tighten six self-locking nuts (13) to 43-47 lb-ft (58-64 N m). (10) Connect eight hydraulic tubes (14) to valve manifold (2). (11) Connect 11 hydraulic tubes (15) to valve manifold (2). (12) Connect 13 solenoid electrical connectors (16) to valve manifold (2). 16-334