Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 567 of 1178

TM 9-2320-366-34-3 (61) Install relief valve (87) in valve manifold (8). (62) Install five preformed packings (88) and two preformed packings (89) on valve manifold (8). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (63) Apply sealing compound to threads of four screws (90). (64) Install top directional valve body (73) on valve body (8) with four screws (90). (65) Apply sealing compound to threads of lever (91). (66) Install lever (91) in pinion seal (82). (67) Perform steps (61) through (66) on remaining three top directional valve bodies. NOTE All solenoids are assembled the same way. One solenoid shown. (68) Install solenoid cylinder (92) and solenoid sleeve (93) on solenoid (94). 16-331