TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 563 of 1178
TM 9-2320-366-34-3 NOTE Both shuttle blocks are assembled the same way. One shuttle block shown. (28) Install two preformed packings (38) and backup ring (39) on shuttle block valve (40). (29) Install preformed packing (41) on plug (42). (30) Install shuttle block valve (40) and in shuttle block (43) with plug (42). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (31) Apply sealing compound to threads of two screws (44). (32) Install three preformed packings (45) and shuttle block (43) on valve manifold (8) with two screws (44). (33) Perform steps (28) through (32) on remaining shuttle block. (34) Install 14 preformed packings (46) on plugs (47). (35) Install 14 plugs (47) in valve manifold (8). 16-327