TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 557 of 1178
TM 9-2320-366-34-3 (65) Remove two quad rings (91) and backup rings (92) from pinion seal (85). Discard backup rings and quad rings. (66) Match mark lever cap (88) to bottom directional valve body (79). (67) Remove four screws (93), lever cap (88), and preformed packing (94) from bottom directional valve body (79). Discard preformed packing. (68) Match mark end cap (95) to bottom directional valve body (79). (69) Remove four screws (96), end cap (95), and preformed packing (97) from bottom directional valve body (79). Discard preformed packing. (70) Remove spool (98) from bottom directional valve body (79). (71) Perform steps (56) through (70) on remaining three bottom directional valve bodies. NOTE All solenoid valves are disassembled the same way. One solenoid valve shown. (72) Remove nut (99) and coil (100) from solenoid valve (101). (73) Remove solenoid valve (101) from valve manifold (25). (74) Remove preformed packings (102 and 103) and two backup rings (104) from solenoid valve (101). Discard preformed packings and backup rings. (75) Perform steps (72) through (74) on remaining two solenoid valves. 16-321