TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 548 of 1178
TM 9-2320-366-34-3 16-59. M1089 EIGHT-BANK VALVE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Hydraulic reservoir supply valve and return valve closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench, Adjustable (Item 86, Appendix B) Wrench, Torque 0-175 lb-ft (Item 92, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Rag, Wiping (Item 60, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Lubricating Oil, Gear (Item 50, Appendix C) Adhesive (Item 7, Appendix C) Sealing Compound (Item 75, Appendix C) Kit, Seal (Item 121, Appendix F) Kit, Seal (Item 106, Appendix F) Kit, Seal (Item 107, Appendix F) Kit, Seal (Item 108, Appendix F) Packing, Preformed (8) (Item 225, Appendix F) Lockwasher (14) (Item 143, Appendix F) Nut, Self-Locking (6) (Item 175, Appendix F) Personnel Required (2) a. Removal. NOTE Tag electrical connectors and connection points prior to disconnecting. (1) Disconnect 13 solenoid electrical connectors (1) from valve manifold (2). CAUTION Cap or plug hydraulic tubes and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic tubes and connection points prior to disconnecting. (2) Disconnect 11 hydraulic tubes (3) from valve manifold (2). 16-312