TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 545 of 1178
TM 9-2320-366-34-3 16-58. M1089 OUTRIGGER BEAM REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Outrigger extended (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Outrigger jack cylinder assembly removed (para 16-56). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tool and Special Tools (Cont) Chain, Welded (TM 9-2320-366-10) Materials/Parts Pin, Cotter (2) (Item 332, Appendix F) Personnel Required (3) a. Removal. WARNING Outrigger beam weighs approximately 175 lbs (80 kgs). Attach suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Left and right outrigger beams are removed the same way. Right side shown. (1) Remove four bolts (1) and two clamps (2) from two hydraulic clamps (3). (2) Remove cotter pin (4) from pivot pin (5). Discard cotter pin. (3) Remove pivot pin (5) from outrigger extension cylinder (6). 16-309