TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 540 of 1178
TM 9-2320-366-34-3 16-56. M1089 OUTRIGGER JACK CYLINDER REPLACEMENT (CONT) WARNING Jack cylinder weighs approximately 170 lbs (77 kgs). Attach suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (13) requires the aid of an assistant. (13) Remove jack cylinder (5) from outrigger (4). b. Installation. NOTE Left and right side outrigger jack cylinders are installed the same way. Right side shown. (1) Position floor jack under outrigger (1). NOTE Step (2) requires the aid of an assistant. (2) Install jack cylinder (2) in outrigger (1) until jack cylinder rests on floor jack. Adjust jack as necessary. (3) Remove two cotter pins (3) from pin (4). Discard cotter pins. (4) Remove pin (4) from jack cylinder (2). 16-304