TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 539 of 1178
TM 9-2320-366-34-3 CAUTION Cap or plug hydraulic openings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (4) Disconnect two hoses (6) from adapters (7). (5) Remove two adapters (7) from jack cylinder (5). (6) Removed two preformed packings (8) from adapters (7). Discard preformed packings. (7) Raise jack cylinder (5) enough to take weight off pin (9). (8) Remove two cotter pins (10) from pin (9). Discard cotter pins. (9) Remove pin (9) from jack cylinder (5). (10) Raise jack cylinder (5) up approximately six inches. (11) Install pin (9) in jack cylinder (5). (12) Install two cotter pins (10) in pin (9). 16-303