TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 535 of 1178
TM 9-2320-366-34-3 16-55. M1089 HYDRAULIC ORBIT MOTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cross relief valve removed (para 16-54). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Pan, Drain (Item 43, Appendix B) Tools and Special Tools Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Sealing Compound (Item 76, Appendix C) Packing, Preformed (Item 237, Appendix F) Packing, Preformed (Item 230, Appendix F) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to hydraulic system. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (1) Disconnect hydraulic hose (1) from 90-degree fitting (2). 16-299