TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 534 of 1178
TM 9-2320-366-34-3 16-54. M1089 CROSS RELIEF VALVE REPLACEMENT (CONT) (3) Install two preformed packings (5) on hydraulic motor (6). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of four screws (7). NOTE Step (5) requires the aid of an assistant. (5) Install cross relief valve (4) on hydraulic motor (6) with four lockwashers (8) and screws (7). (6) Tighten screws (7) to 28-42 lb-ft (38-57 N·m). (7) Connect three hydraulic hoses (9) to 90-degree fittings (3). c. Follow-On Maintenance. (1) Connect batteries (TM 9-2320-366-20-3). (2) Perform crane load test (para 16-62). End of Task. 16-298