TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 533 of 1178
TM 9-2320-366-34-3 NOTE Step (3) requires the aid of an assistant. (3) Remove four screws (4), lockwashers (5), and cross relief valve (1) from hydraulic motor (6). Discard lockwashers. (4) Remove two preformed packings (7) from hydraulic motor (6). Discard preformed packings. (5) Remove three 90-degree fittings (3) from cross relief valve (1). (6) Remove three preformed packings (8) and preformed packings (9) from 90-degree fittings (3). Discard preformed packings. b. Installation. (1) Install three preformed packings (1) and preformed packings (2) on 90-degree fittings (3). (2) Install three 90-degree fittings (3) in cross relief valve (4). 16-297