TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 530 of 1178
TM 9-2320-366-34-3 16-53. M1089 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT) WARNING Swing drive assembly weighs approximately 70 lbs (32 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Swing drive gear must be meshed with rotation gear during installation of swing drive assembly. (3) Lift swing drive assembly (3) in mounting position. (4) Position swing drive assembly (3) in crane assembly (4) with nine washers (5) and screws (6). (5) Tighten screws (6) to 90-110 lb-ft (122-149 N m). (6) Remove two screws (1) and swing drive assembly bracket from swing drive assembly (3). 16-294