TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 523 of 1178
TM 9-2320-366-34-3 d. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install two races (1) and bearing (2) in hub (3). (2) Install bearing (4) on shaft (5). (3) Install shaft (5) in hub (3). (4) Install seal (6) in hub (3). (5) Install bearing (7) on shaft (5). (6) Position lockwasher (8) and nut (9) on shaft (5). (7) Tighten nut (9) until shaft (5) starts to turn. (8) Tighten nut (9) until one tang on lockwasher (8) aligns with slot in nut (9). (9) Bend tang of lockwasher (8) up in slot of nut (9). 16-287