TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 516 of 1178
TM 9-2320-366-34-3 16-53. M1089 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT) (6) Remove two screws (4) and swing drive assembly bracket from swing drive assembly (6). (7) Install plate (5) in swing drive assembly (6) with two screws (4). b. Disassembly. (1) Remove hydraulic hose (1) from 90-degree fitting (2). (2) Match mark cylinder housing (3) to end cover (4). (3) Remove four screws (5), washers (6), and two drive assembly stops (7) from cylinder housing (3). WARNING Cylinder housing is under tension, use care when removing cylinder housing from end cover. Failure to comply may result in injury to personnel. (4) Remove cylinder housing (3) from end cover (4). 16-280