TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 511 of 1178
TM 9-2320-366-34-3 16-52. M1089 OVERLOAD SHUTDOWN REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Materials/Parts Lockwasher (3) (Item 139, Appendix F) Lockwasher (2) (Item 144, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) NOTE Use serial number of MHC when ordering replacement overload shutdown. a. Removal. CAUTION Overload shutdown cable is on a tension reel. Allow cable to rewind slowly. Failure to comply may result in damage to equipment. (1) Disconnect cable eye (1) from bolt (2). NOTE Tag connectors and connection points prior to disconnecting. (2) Disconnect three connectors (3) from overload shutdown (4). NOTE Step (3) requires the aid of an assistant. (3) Remove two bolts (5), lockwashers (6), washers (7), and clipnuts (8) from boom assembly (9). Discard lockwashers. 16-275