TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 509 of 1178

TM 9-2320-366-34-3 (22) Install bearing (26) in RH drum end (27). (23) Install seal (28) in RH drum end (27). (24) Install preformed packing (29) on RH drum end (27). (25) Install two plugs (30) in RH drum end (27). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (26) Apply sealing compound to threads of six bolts (31). (27) Position RH drum end (27) on ring gear (6) with six washers (32) and screws (31). (28) Tighten screws (31) to 63-69 lb-ft (85-94 N m). 16-273