TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 507 of 1178
TM 9-2320-366-34-3 WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of eight screws (5). (5) Position LH drum end (2) on ring gear (6) with eight washers (7) and screws (5). (6) Tighten screws (5) to 168-192 lb-in. (19-22 N·m). NOTE All three gears are assembled the same way. One gear shown. (7) Install two roller sets (8) and separator (9) in gear (10). (8) Install gear (10) and two washers (11) in carrier (12) with pin (13). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (9) Install retaining ring (14) on pin (13). (10) Perform steps (7) through (9) on two remaining gears (10). (11) Install washer (15) in carrier (12). 16-271