TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 500 of 1178
TM 9-2320-366-34-3 16-50. M1089 OIL FILLED DISC BRAKE ASSEMBLY REPLACEMENT (CONT) b. Installation. (1) Install two preformed packings (1) on 45-degree fittings (2). (2) Install two 45-degree fittings (2) on oil filled disc brake assembly (3). (3) Install preformed packing (4) on check valve (5). (4) Install check valve (5) on oil filled disc brake assembly (3). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (5) Apply sealing compound to threads of three screws (6). (6) Position oil filled disc brake assembly (3) on hoist (7) with three washers (8) and screws (6). (7) Apply sealing compound to threads of two screws (9). (8) Position bracket (10) on oil fill disc brake assembly (3) with two washers (11) and screws (9). (9) Tighten screws (6 and 9) to 60-90 lb-ft (81-122 N m). 16-264