TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 491 of 1178
TM 9-2320-366-34-3 (4) Remove two preformed packings (9) from hydraulic motor control valve (7). Discard preformed packings. (5) Remove two fittings (2) from hydraulic motor control valve (7). (6) Remove two preformed packings (10) and preformed packings (11) from fittings (2). Discard preformed packings. (7) Remove 45-degree fitting (4) from hydraulic motor control valve (7). (8) Remove preformed packings (12 and 13) from 45-degree fitting (4). Discard preformed packings. b. Installation. (1) Install preformed packings (1 and 2) on 45-degree fitting (3). (2) Install two preformed packings (4) and preformed packings (5) on fittings (6). (3) Install 45-degree fitting (3) and two fittings (6) in hydraulic motor control valve (7). (4) Install two preformed packings (8) on hydraulic motor control valve (7). (5) Install hydraulic motor control valve (7) on hydraulic motor (9) with four lockwashers (10) and screws (11). (6) Connect hose (12) to 45-degree fitting (3). (7) Connect two hoses (13) to fittings (6). 16-255