TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 490 of 1178
TM 9-2320-366-34-3 16-47. M1089 HYDRAULIC MOTOR CONTROL VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Lockwasher (4) (Item 139, Appendix F) Materials/Parts (Cont) Packing, Preformed (2) (Item 231, Appendix F) Packing, Preformed (2) (Item 237, Appendix F) Packing, Preformed (Item 262, Appendix F) Packing, Preformed (Item 236, Appendix F) Packing, Preformed (2) (Item 265, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) a. Removal. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses and connection points prior to disconnecting. (1) Disconnect two hoses (1) from fittings (2). (2) Disconnect hose (3) from 45-degree fitting (4). (3) Remove four screws (5), lockwashers (6), and hydraulic motor control valve (7) from hydraulic motor (8). Discard lockwashers. 16-254