TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 479 of 1178
TM 9-2320-366-34-3 16-45. M1089 PROXIMITY SENSOR REPLACEMENT This task covers: a. Removal b. Installation c. Adjustment d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Boom positioned over tool boxes (TM 9-2320-366-10- 2). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 ft-lb (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Lockwasher (2) (Item 139, Appendix F) Ties, Cable Plastic (Item 92, Appendix C) Sealing Compound (Item 76, Appendix C) a. Removal. (1) Disconnect proximity sensor connector (1) from overload shutdown box (2). NOTE Remove plastic cable ties as required. (2) Remove nut (3), washer (4), clamp (5), and cable (6) from boom stud (7). (3) Remove clamp (5) from cable (6). 16-243