TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 478 of 1178
TM 9-2320-366-34-3 16-44. M1089 CABLE FOLLOWER REPLACEMENT/REPAIR (CONT) (7) Install two springs (20) on posts (6). d. Installation. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Apply sealing compound to threads of two screws (1). (2) Install cable follower assembly (2) on hoist assembly (3) with four washers (4) and two screws (1). WARNING Use care when installing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (3) Attach springs (5) to hoist assembly (3). e. Follow-On Maintenance. (1) Install hoist assembly (para 16-43). (2) Operate MHC and check for proper operation (TM 9- 2320-366-10-2). End of Task. 16-242