TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 465 of 1178
TM 9-2320-366-34-3 b. Installation. NOTE Step (1) requires the aid of an assistant. (1) Position turntable (1) over ring gear (2). (2) Route hydraulic hoses (3) and electrical cable (4) through center of turntable (1). (3) Lower turntable (1) on ring gear (2) with match marks aligned. (4) Position four washers (5) and screws (6) on turntable (1) at marked locations. (5) Position 12 washers (7) and screws (8) in turntable (1). (6) Tighten bolts (6 and 8) to 355-385 lb-ft (481-522 N·m). c. Follow-On Maintenance. (1) Install erection cylinder (para 16-38). (2) Install tension link assembly (para 16-39). (3) Install mast (para 16-40). (4) Operate MHC and check for proper operation and for hydraulic leaks (TM 9-2320-366-10-2). End of Task. 16-229