TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 459 of 1178
TM 9-2320-366-34-3 (7) Position tension link cylinder (2) in boom assembly (7) with pivot shaft (8). (8) Install two rivet eyebolts (9) in pivot shaft (8). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (9) Apply sealing compound to threads of two screws (10). (10) Position two bushings (11) and washers (12) in rivet eyebolts (9) with screws (10). (11) Tighten screws (10) to 240-260 lb-ft (325-352 N·m). (12) Perform Steps (1) through (11) on left side tension link cylinder. c. Follow-On Maintenance. Perform crane load test (para 16-62). End of Task. 16-223