Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 458 of 1178

TM 9-2320-366-34-3 16-39. M1089 TENSION LINK CYLINDER REPLACEMENT (CONT) WARNING Tension link cylinder weighs approximately 60 lbs (27 kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (2) through (7) require the aid of assistant. (2) Position tension link cylinder (2) in turntable (3) with pivot shaft (4). (3) Install two rivet eyebolts (5) in pivot shaft (4). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of two screws (6). (5) Position two bushings (7) and washers (8) in rivet eyebolts (5) with screws (6). (6) Tighten screws (6) to 240-260 lb-ft (325-352 N·m). 16-222