TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 454 of 1178
TM 9-2320-366-34-3 16-38. M1089 ERECTION CYLINDER REPLACEMENT (CONT) b. Installation. WARNING Erection cylinder weighs approximately 70 lbs (32 kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant. (1) Install erection cylinder (1) on mast (2) with pivot shaft (3). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (2) Apply sealing compound to threads of screw (4). (3) Install rivet eyebolt (5) in pivot shaft (3). (4) Position bushing (6) and washer (7) in rivet eyebolt (5) with screw (4). (5) Tighten screw (4) to 266-295 lb-ft (360-400 N m). 16-218