Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 449 of 1178

TM 9-2320-366-34-3 (2) Install rivet eyebolt (4) in pivot shaft (3). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. Failure to comply may result in injury to personnel. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in serious injury or death to personnel. (3) Apply sealing compound to threads of screw (5). (4) Position bushing (6), washer (7), and screw (5) in rivet eyebolt (4). (5) Tighten screw (5) to 240-260 lb-ft (325-353 N·m). (6) Install lift cylinder (1) in turntable (8) with pivot shaft (9). (7) Install rivet eyebolt (10) in pivot shaft (9). (8) Apply sealing compound to threads of screw (11). (9) Position bushing (12), washer (13), and screw (11) in rivet eyebolt (10). (10) Tighten screw (11) to 240-260 lb-ft (325-353 N·m). (11) Install two preformed packings (14) on plugs (15). (12) Install two plugs (15) in counterbalance valve (16). 16-213