TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 442 of 1178
TM 9-2320-366-34-3 16-36. M1089 BOOM BASE SECTION REPLACEMENT (CONT) WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in serious injury or death to personnel. (4) Apply sealing compound to threads of screw (5). (5) Position bushing (6), washer (7), and screw (5) in rivet eyebolt (4). (6) Tighten screw (5) to 266-295 lb-ft (361-400 N·m). WARNING Lift cylinders must be supported to install pivot shaft. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (7) requires the aid of an assistant. (7) Install RH lift cylinder (8) in boom base section (1) with pivot shaft (9). (8) Install rivet eyebolt (10) in pivot shaft (9). 16-206