TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 440 of 1178

TM 9-2320-366-34-3 16-36. M1089 BOOM BASE SECTION REPLACEMENT (CONT) (10) Remove screw (10), washer (11), and bushing (12) from rivet eyebolt (13). (11) Remove rivet eyebolt (13) from pivot shaft (14). WARNING Lift cylinder must be supported to remove pivot shaft. Failure to comply may result in serious injury or death to personnel or damage to equipment. (12) Remove pivot shaft (14) from RH lift cylinder (15). (13) Position RH lift cylinder (15) against tool box (7). (14) Remove screw (16), washer (17), and bushing (18) from rivet eyebolt (19). (15) Remove rivet eyebolt (19) from pivot shaft (20). (16) Remove pivot shaft (20) from LH lift cylinder (21). (17) Position LH lift cylinder (21) against tool box (7). (18) Remove boom base section (22) from boom rest. 16-204