TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 437 of 1178
TM 9-2320-366-34-3 WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. (17) Apply sealing compound to threads of four screws (12). (18) Position telescopic cylinder (4) in boom base section (8) with four washers (13), and screws (12). (19) Tighten screws (12) to 151-175 lb-ft (205-237 N·m). (20) Connect hoses (14 and 15) to telescopic cylinder (4). d. Adjustment. (1) Connect batteries (TM 9-2320-366-20-3). NOTE Steps (2) and (3) require the aid of an assistant. (2) Operate MHC to extend and retract boom mid section (1) (TM 9-2320-366-10-2). (3) Hold machinists rule at outer end of boom base section (2); obtain reading to determine high spot of boom mid section (1). (4) Operate MHC to place high spot of boom mid section directly under setscrew (3). (5) Adjust setscrew (3) for 0.06 in. (0.15 cm) maximum clearance. (6) Tighten jam nut (4) on setscrew (3). d. Follow-On Maintenance. (1) Install boom fly section (para 16-34). (2) Place hydraulic reservoir supply valve and return valve in open position (TM 9-2320-366-10-2). (3) Perform crane load test (para 16-62). End of Task. 16-201