TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 428 of 1178
TM 9-2320-366-34-3 16-34. M1089 BOOM FLY SECTION REPLACEMENT/ADJUSTMENT (CONT) c. Installation. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in serious injury or death to personnel. (1) Apply sealing compound to both wear pad mounting locations in outer end of boom mid section (1). (2) Apply sealing compound to contact side of two wear pads (2). (3) Install two wear pads (2) in outer end of boom mid section (1). (4) Apply grease to wear pads (2). (5) Apply sealing compound to threads of two screws (3). (6) Install two wear pads (4) on boom fly section (5) with two screws (3). (7) Apply grease to wear pads (4) and sliding surfaces of boom fly section (5). 16-192