Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 423 of 1178

TM 9-2320-366-34-3 NOTE Steps (12) through (14) require the aid of an assistant. (12) Position LH tension link cylinder (15) in boom assembly (1) with pivot shaft (16). (13) Install mast (17) in boom assembly (1) with pivot shaft (16). (14) Position RH tension link cylinder (18) in boom assembly (1) with pivot shaft (16). (15) Position two rivet eyebolts (19) in pivot shaft (16). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (16) Apply sealing compound to threads of two screws (20). (17) Position two bushings (21), washers (22), and screws (20) in rivet eyebolts (19). (18) Tighten screws (20) to 240-260 lb-ft (325-353 N·m). 16-187