TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 421 of 1178
TM 9-2320-366-34-3 b. Installation. WARNING • Boom assembly weighs approximately 1330 lbs (604 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. • Personnel must stand clear during lifting operations. Failure to comply may result in serious injury or death to personnel. (1) Position boom assembly (1) on boom rest (2). WARNING Lift cylinders must be supported to install pivot shaft. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (2) requires the aid of an assistant. (2) Install LH lift cylinder (3) in boom assembly (1) with pivot shaft (4). (3) Install rivet eyebolt (5) in pivot shaft (4). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of screw (6). (5) Position bushing (7), washer (8), and screw (6) in rivet eyebolt (5). (6) Tighten screw (6) to 266-295 lb-ft (361-400 N·m). 16-185