TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 406 of 1178
TM 9-2320-366-34-3 16-170 Change 2 16-31. M1084/M1086 CRANE LOAD TEST This task covers: a. Static Overload Test b. Deleted c. Dynamic Test d. Follow-on Maintenance INITIAL SETUP Equipment Conditions Vehicle parked on hard level surface (TM 9-2320- 366-10-1). Exercise all MHC crane functions to their full extent with REMOTE CONTROL UNIT (TM 9- 2320-366-10-1). Position MHC to rear center line of vehicle (TM 9- 2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Gloves, Welders (Item 27, Appendix B) Goggles, Industrial (Item 28, Appendix B) Materials/Parts 5500 lb weight 2200 lb weight Personnel Required (3) References TB43-0142 WARNING • When loads are applied to boom cable all personnel must move to a safe distance. Failure to comply may result in injury to personnel. • Personnel shall wear proper eye protection. Failure to comply may result in injury to personnel. • Wire rope can become frayed or contain broken wires, wear heavy leather palmed work gloves when handling wire rope. Failure to comply may result in injury to personnel. NOTE Load testing shall be performed from crane local control panel.