TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 401 of 1178
TM 9-2320-366-34-3 16-29. M1084/M1086 TWO WAY SOLENOID VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Pan, Drain (Item 43, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Packing, Preformed (2) (Item 264, Appendix F) Packing, Preformed (2) (Item 269, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) a. Removal. NOTE Tag electrical connectors and connection points prior to disconnecting. (1) Disconnect electrical connector (1) from two way solenoid valve (2). (2) Place drain pan under two way solenoid valve (2). CAUTION Cap or plug hydraulic connections to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic tubes and connection points prior to disconnecting. (3) Disconnect hydraulic tube (3) from two way solenoid valve (2). (4) Remove two way solenoid valve (2) from hydraulic tube (4). 16-165